upmented New Member
Posts: 10 Status: Offline Joined:
pm
| Overhead Crane for sale (25th Sep 23 at 12:36am UTC) | | Overhead Crane for sale 1. Product Introduction: Double Girder Overhead Crane with Rotating Electromagnetic Hanging Beam is a double-girder electromagnetic bridge crane with multiple rectangular electromagnets. The electromagnet is powered by thyristor rectifier and is equipped with a power failure magnetic protection system. The operating mechanism of the trolley adopts the intermediate working system, the electric conduction of the trolley adopts the form of angle steel opening, and the control method is the closed cab control. When using the electromagnetic hanging beam, the net weight of the electromagnetic chuck should not exceed 8t. It is suitable for lifting long billets, steel plates and other materials. The rated lifting capacity includes the dead weight of the electromagnet and the dead weight of the hanging beam. It relies on the longitudinal movement of the cart running mechanism along the direction of the workshop track, the lateral movement of the trolley and the lifting movement of the electromagnet to work. Our company can carry out special design and manufacture according to the requirements of users. The working class can reach: A5-A8. 2. Parameters: Lifting Weight(t)7.5+7.510+1016+1620+20Customized Span(m)10.5 13.5 16.5 19.5 22.5 25.5 28.5 31.5 Max. Lifting Height(m)16121612Customized Speed (m/min)HoistingA612.513.513.611.8Customized A715.415.915.315.22Customized Travelling of CrabCustomized Travelling of TrolleyA6115.6116.8112.5112.5101.4113102.5102.4102.986.886.6Customized 3. Component: The Double Girder Overhead Crane with Rotating Electromagnetic Hanging Beam is mainly composed of a box-shaped bridge frame, a hoisting trolley (with electromagnetic hanging beam), a cart operating mechanism, a driver's cab and an electrical control system, and is equipped with a power failure magnetic protection system. The hoisting mechanism mostly adopts the arrangement of single motor, double reducer and double drum, in the form of double lifting points. The layout of the hanging beam is divided into two types: perpendicular to the main beam or parallel to the main beam. The rest of the form is the same as the QD crane. The metal structure includes bridge frame, trolley frame and control room. The bridge frame is composed of two main beams, two end beams and other components such as walking platforms and guardrails. The box-shaped structure is adopted, and the main beam bears the weight and external load of the trolley, and has sufficient strength and rigidity. It is a solid plate beam structure with an upper and lower cover plate and two vertical webs to form a closed box-shaped section. The main beam and the end beam are rigidly connected to ensure the rigidity and stability of the bridge frame. The middle parts of the end beams are connected by bolts and can be split into 2-3 sections for easy transportation. The wheel set of the cart is installed under the end beam, which bears the loads in all vertical directions of the crane. The trolley frame is a frame that supports and installs the various components of the hoisting mechanism and the trolley running mechanism, and is also a structural member that bears and transmits all the lifting loads. Fixed hanging beam structure. It is divided into two types: the hanging beam is parallel to the main beam and the hanging beam is perpendicular to the main beam. If the hanging beam is parallel to the main beam, the axes of the two drums are also parallel to the main beam, forming a trolley with a small track gauge and a large wheel base; If the hanging beam is perpendicular to the main beam, the axes of the two drums are also perpendicular to the main beam, forming a trolley with a large track gauge and a small wheel base. The upper part of the hanging beam is hung on the two hooks of the hoisting mechanism through two pin shafts, and the hanging beam can be raised and lowered smoothly through the lifting and lowering of the hooks. The electromagnet is hung on the pin shaft of the hanging beam through the chain to absorb and lift heavy objects. There can be multiple lifting points under the beam to meet the needs of different hanging objects. The eccentric load is not more than 0.5 meters. 4. Applicable Environment: Double Girder Overhead Crane with Rotating Electromagnetic Hanging Beam used to transport steel, iron blocks, scrap iron, scrap steel, iron filings and other materials, and to lift long sections, bars, plates, scrap steel, coils, etc. 5. Wearing Parts: The wearing parts of Double Girder Overhead Crane with Rotating Electromagnetic Hanging Beam include load limiter, rope guides, coupling and brake. 6. How to operate a Double Girder Overhead Crane with Rotating Electromagnetic Hanging Beam? The control room is suspended under the transmission side platform, and the driver's cab has two types: open type and closed type. 7. Transportation: 8. Why choose us? Independently conduct over 20 technological flows. We can offer all kinds of OEM/ODM services. Certified by DIN, ISO, BS, CMAA, CE and other major international standards. 9. Frequently Asked Questions about Double Girder Overhead Crane With Rotating Electromagnetic Hanging Beam (1) Do you have engineer oversea installation service? Yes; we have; (2) What kinds of products do you have? Overhead Crane; Gantry Crane, Hoist; etc. (3) Could we buy spare parts in local once they are out of work? Our main electrical parts brand is some very common brands; it's very easy to buy all the world. But if there is any difficulty, we can post to you by express, such as DHL, UPS, FEDEX, Aramex, etc.Overhead Crane for sale website:http://www.dejuncrane.com/overhead-crane/ | |
|